|
Pre-recorded videos contain pricing or promotional offers that may have expired. Please note, audio may not be available with all videos.
|
This item is currently sold out. Please check again at a later date.
For more information, please contact 1-888-2020-888.
|
What it is:
The Egg Microcurrent & Facial System includes The Facial Toning Tool and Reverse Lift Facial Toning Conductive Gel—everything you need to help redefine the contours of your face.
Who it is for:
This system is for all skin types.
What it does:
The Facial Toning Tool helps temporarily tone and firm the muscles in the face through adjustable, modulating, electronic impulses to help restore your natural contours. The Facial Toning Tool works effectively with the Conductive Gel which is applied generously to the area of the skin in which you wish to apply the metal contact nodules. Alternatively, you may apply a dab of the Conductive Gel to each module on both Facial Toning Units. The Facial Toning Tool has modulated electronic impulses that are generated through stainless steel contact nodules. Impulses provide facial and neck muscle exercise by gently contracting and relaxing muscles. Twin hand-held unit design allows simultaneous cosmetic treatment on both sides of your face to occur at one time. Tthis cuts your regimen time in half. There are three programs: Deep Skin Toning, Surface Skin Toning and Enhancing Skin Routine. This kit comes with an instructional DVD and a user guide that explains the programs and device use, all packed in a white cosmetic case.
What is included:
• Microcurrent Facial Toning Tool
• Reverse Lift Conductive Gel (118ml/4oz)
• Instructional Guide
• Instructional DVD
• Carry Case
• Reverse Lift Reverse Firming Pads (60 count)
Suggested Usage:
Help temporarily tone and firm the muscles in the face by using one of the 3 programs available with this great device.
• Apply a generous layer of Conductive Gel to the area of the skin to which you wish to apply the metal contact nodules
• Alternatively, you can apply a dab of Conductive Gel to each metal contact nodule on both Facial Toning Units
• See the Facial Toning System User Guide and Instructional DVD for detailed directions on using the device
Reverse Lift Facial Toning Conductive Gel:
Water, Propylene Glycol, Soluble Collagen, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Magnesium Sulfate, Polysorbate 20, Sodium Hydroxide, Phenoxyethanol, Fragrance
FREQUENTLY ASKED QUESTIONS
Q: Can I use it more than once a day?
A: We recommend no more than one cosmetic treatment a day.
Q: Do I keep the probes in one place or do I slowly slide them up?
A: Either way... or both. Keeping the probes in one place provides a more intense muscle contraction- This is good for toning. Sliding the probes during the pulsation helps revitalize skin tone and temporarily firms the muscles to help restore your natural contours.
Q: Is the conductive gel necessary and if so, how much?
A: Yes the Conductive Gel is necessary. The skin must be wet in order for the Tool to work. Be sure to have a layer of Conductive Gel on the skin at all times. If the gel dries on the skin during your treatment simply remoisten by applying more gel to the face and/or directly to the individual probes.
Q: The machine seems to be working- it turns on, beeps ect... But I don't feel anything on my face.
A #1: INTENSITY LEVEL: The Facial Toning Tool features 10 intensity levels- each time you turn the Tool 'ON' it starts at LEVEL 0. The green 'Intensity' Up Arrow button (on the outside of the tool) must be pressed several times to reach a level that can be felt on your skin. The Tool will not start until you choose your Intensity. The Intensity buttons are conveniently located on the outside of the Tool to allow you to adjust the level of intensity, lower or higher, to each area of the face you are treating without taking the probes off of the face.
A #2: CONDUCTIVE GEL: The face must be wet. Make sure there is a layer of Conductive Gel on the skin, on the area you are treating.
Q: Why does the machine turn off after 1 minute?
A: After each 1 minute interval the machine stops and beeps, indicating that it is time to move to the next treatment spot of the face. Simply tap the Intensity Button once on the outside of the tool to initiate another 1 minute interval as you slide the tool to the next treatment spot. This should not even require you to remove the probes from the skin. By tapping the green Intensity UP arrow button once, the Tool will continue at the exact same level as you were just using- from here you can now adjust up or down.
Q: What am I supposed to feel?
A: The Facial Toning Tool does not warm, vibrate or massage. It sends alternating impulses into the skin to contract and then release the muscle. You should feel a small current tensing the facial muscle and then relaxing it in 5 second intervals
ie. tense for 5 seconds, relax for 5 seconds, tense for 5 seconds etc... . The feeling should be comfortable, if the impulse is too strong, lower the intensity by pressing the red down-arrow Intensity button found on the outside of the tool.
Q: I feel a current coming from one of the tools but not the other. Shouldn't both sides of the tool work the same?
A: Yes, both sides of the Tool should work the same when treating both sides of the face at once. Make sure both sides of the face being treated have the same amount of Conductive Gel. Also, adjust the position of the probes slightly for each side of the face until you feel the impulse connect. Our faces are not perfectly symmetrical and the positions on the face may need to be found individually from side to side.
QUICK START GUIDE
1. Review your user guide to get familiar with your device.
2. Insert the included 9v battery as directed.
3. Apply a generous amount of the Conductive Gel to the face.
4. Turn machine on by pressing the red power button once.
5. Press the green (Up Arrow) 'Intensity' button on the outside of the tool two or three times.
6. Place units on both sides of the face directly on the wet Conductive Gel.
7. Slightly glide metal probes upon the face until you can feel the sequential impulse.
8. Adjust the Intensity button on the outside of the tool up or down to increase or decrease the strength of the current.
9. The tool will sound a 'beep' to indicate a 60 second interval. After each 60 second interval the impulse will pause - simple press the intensity button once on the outside of the tool to initiate the next 60 second interval and glide the machine to the next treatment area of the face.
10. Continue as desired.
11. Reapply the Conductive Gel as often as needed. The skin must be wet with Conductive Gel for the Tool to work.
About Serious Skin
Serious Skin Care offers no nonsense treatment solutions with original anti-aging advances designed for everyday use, not cosmetic cover-ups. Each Serious Skin Care line is based on clinical success and exacting research, and the simple fact that every woman's skin is unique. Whatever your skin type or challenge, Serious Skin Care has your solution. Take care of your skin with brand new formulas and convenient kits from Jennifer Flavin-Stallone.